You probably have a lot of things to consider before committing to a new interior for your kitchen.
Each countertop comes with strength and longevity, but marble is more permeable.
If you have young children, or kitchen counters prone to spills, you may want to consider granite over marble.
The acidity will create permanent etches and unwanted discolored patches on your marble.
It is also a best practice to seal your marble countertops regularly so that they stay shiny and in pristine condition.
Remember also, that choosing white marble countertops allows for a lot of versatility in the color scheme of your kitchen.
While both are beautiful and unique, granite is a bit more durable than marble countertops.
However, the luxury and decadence that accompanies a marble countertop cannot be matched.
Acidic substances tend to damage marble, so if anything is spilled on your countertops, be sure to wipe it up right away.
The best cleaning method is to use warm water and a non-abrasive cloth.
Choosing bright and bold accent colors creates a dramatic effect due to the contrast, and provides a stage for your white marble to stand out against.
Marble Countertops: Everything You Need To Know by housemethod.com
Here’s everything you need to know about marble countertops, from heat resistance and durability to price and maintenance.
Avoid setting down hot pots and pans on its surface since they could burn or scratch the marble; always use a pot holder to reduce the risk of discoloring or burning the surface.
Marble countertops should be sealed to protect them from stains, scratches, and other damage.
We recommend sealing white and light-colored marble more frequently, somewhere around once every three months.
You’ll want to avoid putting excess weight on the countertop though, as this could lead to cracks in the marble.
Most types of marble stand out because of their beautiful veining.
Besides liquids, acidic items and color-saturated spices like turmeric can also be problematic for marble countertops.
Avoid abrasive and acidic cleaning products like bleach, as these can damage and dull the marble and make the sealant less effective.
When handling or cutting acidic foods, be sure to use a cutting board or butcher’s block to reduce the risk of etching.
Carrara is typically more affordable because more of it is quarried.
Determine what type of thickness would be best for your space.
Since each marble slab is unique, you’ll want to look at the actual pieces before deciding which would look best in your home.
If you don’t have time for this type of upkeep, consider more maintenance-friendly countertop options like granite or soapstone.
Here are five questions to help you determine which style is right for your home.
Plus some tips and tricks to ensure that it’s always fresh, never stale.
We cover everything you need to know from coverage to cost, so you can choose the best home warranty.
If you’re planning on installing marble countertops in your kitchen or bathroom, you can choose from various colors and grains to find a style that suits your taste.
Though this stone countertop is heat resistant, note that it’s not extreme-temperature resistant.
If you seal your marble countertops upon installation , and then every six months thereafter, they’ll be less susceptible to stains and damage.
Many people seal their own countertops as a way of saving on upfront costs, whereas others hire professional help.
In many cases, the veining pattern is determined by the way the marble is cut.
Liquids can seep into marble fairly easily, quickly turning a spilled glass of juice from a small mistake into a huge headache.
Fortunately, some stains will fade over time and many can be removed with typical household cleaning products.
If you find yourself dealing with lightly-colored stains, pour a few drops of ammonia and ½ cup of hydrogen peroxide onto a clean cloth and wipe up the stain.
For smaller stains, create a paste made up of one part baking soda and one part water and leave it on the affected area overnight, wiping up the residue in the morning.
Etching results in the marble looking a different color when the light hits it a certain way.
If you’re concerned about scratches, a honed finish could be a better option for you than a polished finish.
Save money on your marble countertops by choosing tiled marble rather than slab marble.
You can also use leftover tiles to replace existing tiles that crack or receive damage.
You’ll want to wipe the countertops with a soft cloth and warm water daily and consider sealing the surface to prevent stains.
These guest houses leave no detail behind, every need and comfort of their guests seen to, their environments impeccably dressed.
Read our full review to determine if this vacuum is best for you and your cleaning needs.
Is it worth it to do it yourself or should you hire a professional?
I Have A Marble Countertop In My Bathroom That Needs To Be Rehoned. How Can by justanswer.com
I just use a random orbital sander with special type of sanding paper for marble?
Once you have removed all of the staining you will want to seal and polish the marble entirely.
A mixture of molding plaster and bleach will remove your stains with out sanding.
I am thinking you would never use this on any marble that is not light in nature, correct?
If your marble is real its color is natural and runs through the marble.
Is there a small machine to sand the floor and how difficult is it?
Just finished spray texturing the ceiling and would like to refinish the hardwood oak floors while the baseboard is off and room is clear of furniture.
Can you recommend one that is pretty inexpensive and well made?
However, this is a little hard to control on amount surface you will be taking off.
You might even add some small globs of toothpaste when using the medium steel wool.
If the answer works for you go ahead and make the “acceptance” and you may then, also use the “feedback” feature.
Mix the molding plaster with bleach to create a paste and apply about one half of an inch thick.
At the end of two days the plaster can be removed by pealing it off, it will not be hard to remove.
Will this paste of plaster of paris and bleach work only on light colored marble?
I made it a little thinner and will wait to see how it turns out.
Is there anyone there with real experience who can guide me through it?
I was thinking of sanding the wood floor in a small bedroom.
The carpet was removed and revealed wood flooring in some rooms.
How To Remove Stains From Marble [DIY + Stain Removal Products] by broomberg.in
However, marble is a soft sedimentary rock which is porous and so it tends to stain very easily.
The liquid cleaner or chemical slowly draws the stain out into the absorbent material.
It may take up to two to three applications for stubborn stains.
It is easy to use and works on most of the stains that we tested.
The idea is to apply a 5 mm thick layer of the paste on the stain, cover it with plastic film and leave if for at least 12 hours before removing.
After 2-3 hours remove the plastic film and let the paste dry.
The best way to get rid of such stains is to avail floor grinding and polishing services so that the stained later can be removed and fresh clean layer can be revealed.
Our staff bathroom had a big-ugly acid stain because of blue toilet cleaner.
So, we finally got grinding and polishing done on the floor.
But she doesn’t shy away from challenges, as long as that challenge is not to diet.
If that does not work the best way is to get floor grinding done.
Marble is very porous and most stains, especially the ones caused by acid seep deep into the stone and cannot be removed easily.
Using a grinding machine and abrasive pads a layer of the stone is removed by grinding it down.
This also works if the marble has become dull from regular use.
If you allow the spilled oil on it for some time, it will leave a stain.
Without appointing a professional, you can do it yourself and get back its original radiance.
If that does not work it would be necessary to get the floor polished.
Facebook group that we have created so we can also take the opinion of others.
This natural stone is the flooring material of choice because it is relatively inexpensive and looks really good.
It is mainly made up of calcium carbonate which reacts with acidic liquids forming permanent stains.
The longer it remains, the more difficult it becomes to remove stains from marble.
In case the stain cannot be removed by these methods you would need floor grinding and polishing services.
The application of poultice may have to be repeated to remove certain stains completely, but some stains may still never be thoroughly removed.
If the spot will be still visible, repeat the process till complete elimination of the spot.
This is understandable as acid eats into the surface of the marble and forms a permanent stain.
You can find out more about floor grinding for stain removal the last section.
We tested this product on a white marble which had a rust stain on it and were amazed by the results.
We tried all kinds of home remedies on it without any success.
As we have mentioned you can try the poultices that we have suggested.
This will remove all kinds of stains as a layer of the stone is removed.
The methods depicted on the post are very simple and one inexpert can do it conveniently.
The cleaner should not use strong acid or bleach to remove the stains.
If the plates are not set rightly, the water can enter inside.
I just tried the baking soda and hydrogen peroxide and will wait the 2 days to see how much comes out.
Do you think floor grinding is the only way to remove these stains?
Is it possible for you to share some pictures of the affected area?
Sources:
Leave a Reply
You must be logged in to post a comment.