How To Paint Marble With Pictures by wikihow.comAlternatively, you can create a marble effect on nearly any surface using a few different colors of paint. If it can’t be moved, open plenty of windows and doors and turn on fans to ventilate the area. To prevent drips from staining your floor, lay out a drop cloth or old blanket under the item. Paint the item using long, even strokes in the same direction. Refer to the paint can to find out how long it takes to dry. The sea sponge will help create a texture similar to that of a true marble surface. The color you choose is up to you, though yellow or gray work well. Use a medium-sized paint brush to draw veins on top of the surface. You don’t need to let the paint dry between coats and techniques because you will be blending the colors together. This will help to blend the color and make it look more natural. Brush it lightly back and forth over the surface to soften the look of the marble effect.
How To Make Gold Color Marble Painting | Duration 6 Minutes 10 Seconds Use a very small paintbrush to draw small veins across the surface of the object. For instance, if you used white for the base coat and gray for the large veins, use black to create small veins. If you aren’t happy with the way a vein or section looks, dip a sponge in the base paint and cover it. Once you’re satisfied with the way the item looks, allow it to dry completely. If you painted a wooden surface, though, you’ll need to apply 2 coats of polyurethane. Use a paintbrush to apply a thin layer over the entire surface. Before you hang your painting or put items on your new “marble” surface, allow the paint and/or polyurethane time to dry completely. You can use painter’s tape to secure the drop cloth and to mask any areas you don’t want painted, such as an electrical outlet or faucet spout. Paint won’t stick to marble’s glossy finish, so it’s necessary to give it some texture. Rinse or replace the tack cloth as needed to remove all the dust and debris. Use a clean paint brush or roller to apply a thin, even layer of high-gloss oil-based paint in the color of your choice. If you rush the job, the finish may bubble, smear, or become patchy. You will definitely want to apply a second coat, and perhaps even a third or fourth, depending on the color you are painting and how it looks after each coat. Otherwise, the items may stick to the surface and/or remove the paint. With the right preparation and priming, however, you can paint over marble and make it look great. No matter which method you choose, you’ll have a beautiful, freshly-painted surface with a little time and effort. If the item can be moved, you may want to take it outside or to a garage or patio. Use painter’s tape to mask any parts you don’t want to get paint on, such as a drawer pull. Use a large paintbrush or roller to add a base coat in a light color, like white, cream, or silver. The type of paint you need depends on the object you are painting. Generally, latex paint needs to dry for about 4 hours, while oil-based paint may need up to 16 hours to dry fully. High humidity and low temperatures can increase the drying time. Using the same paint as you did for the base coat, apply another layer using a sea sponge. Dab the sponge over the entire surface of the object you are creating a marble effect on. Study real pieces of marble, either in person or online, so you know what the veins look like.
How To Marble Car Paint Using House Of Kolor Marbilizer | Duration 3 Minutes 21 Seconds They should look natural and random, rather than symmetrical or man-made. You may want to thin out the paint with water to create a more natural look. Get a clean sea sponge damp and dab it over the veins you created. A dry paintbrush can help even out the color and blend the veins even further. If the brush becomes covered in paint, wipe it off or switch to a clean, dry brush. Pick a color that is a few shades darker than you used to create the larger veins. Vary the width, length, and placement of the veins so it looks like natural marble. You could put a small amount of the base color on the sponge to help even out the look of the veins, if you want. Then, add new veins using the same method as before, if necessary. If you’ve created an acrylic painting on a canvas, you’re done and don’t need to seal it. Allow the first coat to dry completely, which may take up to 2 hours. Avoid touching the surface or moving the object during this time. It’s important to have proper ventilation when sanding and painting so the dust and fumes don’t create respiratory issues. A drop cloth or old blanket will protect the floor from paint spills. Rub 36-grit sandpaper back and forth over the surface you are going to paint to remove all of the finish. The marble should look dull and feel a little rough when you are finished. To remove the dust created by sanding, wipe down the area with a damp tack cloth. Use a paint brush or roller to thinly coat the entire surface of the area you want to paint. Plan to do this project over several days so that the end result is exactly what you want. After applying the first coat of paint, wait 16 hours or more before applying another coat. Use the same method as before to apply additional layers, and remember to let each coat fully dry before moving on. It’s important not to touch or set anything on the marble surface in the meantime.
How To Paint Marble | Duration 5 Minutes 32 Seconds Test the paint on a small area of the marble if you want to see what the color will look like once it dries.
How To Paint Faux Marble by doityourself.comHowever, there is a downside to this home decor trend: it’s quite pricey. With that in mind, you can really let your imagination run wild with the possibilities. Sand the surface until it’s completely smooth with medium grit sandpaper. Afterward, apply two to three more coats, ensuring each dries completely before moving on to the next. To make veining easier, purchase a small marble tile to make it easier to visualize what you want your project to ultimately look like. Remember that marble veins are typically positioned diagonally and appear to be slightly blurry. Drag the feather across, moving it on its side back and forth gently. You should hold the spray bottle about a foot away from the surface as you mist. Use a sea sponge to blot excess water and make these changes. Once you’ve finished, you’ll have a stylish conversation piece that no one would guess is actually anything other than marble itself. From countertops to vases to flooring, marble presents a sleek, chic, and stylish look that is highly desirable. Luckily, you can still take advantage of this look without paying the high price tag. Simply paint items made of a less expensive material to look like marble. There is a wide range of items that you can take advantage of this technique with. Marble looks great in any room, so use this painting technique to compliment your kitchen, act as an accent in your family room, or to spruce up your bedroom.
How To Make Marble Painting Gray Color | Duration 1 Minutes 8 Seconds After you’re done sanding, remove dust and grit with either a tack cloth or a slightly damp rag. You should continue applying paint until you are satisfied with the smoothness of the white paint. The “veining” is what gives this paint job the look of marble, though, so it’s definitely important. To successfully vein the surface, mix each color of gray paint with water, using the ratio of three parts of paint to one part of water. Dip the tip of the feather into the lightest gray paint, then draw a diagonal line across the surface. This gives the line a more natural look rather than a line that is straight and rigid. This gives the lines the blurred effect you are looking for. If you made any mistakes while veining the area, this is a great time to rectify it. Mist as you go and don’t forget to vein the sides of the surface you’re working on for the full effect. Apply a thin top coat with a roller and let it dry thoroughly. Pour on the wax and allow it to dry, buff it, and then reapply. Creating a marble look alike piece is as easy as that, and it’s a fun process, too.
You HAVE To See How Easy These Marble Wine Glasses Are To Paint! by somethingturquoise.comI say you need no painting experience, just patience for dry time. Whatever your reason, we’re on board and can’t wait for you to try this easy project! Also consider finish, use all glossy or all satin to keep things looking proper. The mixture is a 1:2 ratio, meaning you double the amount of marbling medium compared to the paint. You’re looking for the consistency of freshly melted ice cream. Let excess paint drip off the glass back into the tray for 30-60 seconds. If any paint peeled off or pooled up, touch it up with a little more paint or try to carefully peel it off and touch up.
Watercolor Marble | Duration 6 Minutes 30 Seconds Set a timer for 30 minutes, when the time is up turn off the oven and let your glasses cool down inside the oven to prevent cracking. Give your glasses the full 72 hours to dry before you oven cure them, and the full 72 after curing them. Making these marbled glasses would be a super fun project to do with your bridesmaids one night or a fabulous addition to gift bags you’re assembling for them… or maybe you just want to make a set to match your newlywed home decor. The marbling medium thins out the paint to allow it to drip and flow down the glass, if your mixture is too thick it won’t dry properly. Throw it out and use a different color because it won’t dry properly! Drip, drop, slop the paint on the tray to create your marble look. When you have a good coverage of paint, use one spoon to drag and swirl the paint around a little bit. I recommend drying for 30 minutes, wipe off excess paint, dry overnight, then in the morning carefully take the glasses off the push pins and let them finishing drying upside down for 48 hours. If you do, your glasses and their beautiful paint job will last a very long time.