The Counters Blog

Sick All White Kitchens? Go Crazy With A Splash Or Two Of Colour…

A growing number of consumers are looking to add some friendliness and warmth to the often cold, clinical white-and-gray cooking spaces that have dominated the past decade. Or colour can come in a smaller, lower-risk detail, such as a yellow toaster or an emerald-green glass pendant lamp. Manufacturers are dishing up kitchen options in a new rainbow of hues. For a kitchen using one colour in multiple elements, he suggests sticking to green, blue or yellow. You can use a colour to tie in a stand mixer or backsplash of the same hue. We ask you to keep your comments relevant and respectful. Unauthorized distribution, transmission or republication strictly prohibited. Cobalt blue, pale pink and pumpkin are among the colours that are seeping into cabinets, islands, and even sinks and faucets. You could simply paint your white walls grass green or peony pink. There are also 200 custom colours; you can even get a chartreuse dishwasher. Quartz and natural stone manufacturers are adding interest to their surfaces using glass chips or metallic flecks. The centerpiece of the space is a marble-topped oval wooden table that serves as a free-standing island. Or you can just make this faucet the only colour in your kitchen. We are committed to maintaining a lively but civil forum for discussion and encourage all readers to share their views on our articles.

Floral Illusion by simplygoodstuff.com

The thick glass is virtually unbreakable and totally dishwasher safe, so you will have a long lasting vase that is virtually maintenance free. Give a pop of color to your bathroom mirror, or brightemn up the kithcen window with clippings from your garden. Use on windows, mirrors, walls or doors to bring color, fragrance and beauty to any space. It is almost magical in it’s operation because it will appear to float in mid air while it displays the flowers of your choosing. It holds on tight until you want it down, and it can easily handle any amount of flowers that will fit along with water, sand or other fillings as necessary.

Kitchen Design Tips Choosing Your Countertop & Backsplash Materials | Duration 3 Minutes 26 Seconds It is the perfect way to add a delightful floral touch to brighten any location. If you know someone living in a retirement home or anywhere else where space is limited, this bud vase can be the perfect item to add some cheer to their compact living quarters. This self contained unit will hold the perfect amount of water to keep plants and flowers alive and looking beautiful while they are hanging up to beautify your space. This attractive little vase will enhance the look of any space. Simply fill the vase with your favorite flowers and then add water for a unique mini bouquet. Use some potpourri and put one in your bathroom for when guests come over. Use fresh or dried flowers to create a great little floral accent with this suction cup vase. The vase lets me add a wee bit of decoration for quick fun and hominess as we travel. They’re tiny and just perfect to put on, say, a guest bathroom mirror with three or four flowers, stems cut short. I like to always have them for that last minute little gift! She loved the vase and wants more to place around the house. I was trying to clean the mirror and hit the vase, it fell to the marble counter and didn’t break! I bought 6 to give to friends “just because,” and they were all greatly appreciated. It really is wonderful and adds to my every day! I put one up on my slider to make sure it sticks well and it does. I think the se could be fun to use on a bathroom mirror for example to add a cheery little surprise. Bought 3 of these window suction bud vases for my mother’s 93rd birthday. This high quality flower vase is the perfect product to allow you to have mini flower arrangements and garden clippings almost anywhere. It will last for years, and allow you to easily display fgresh flowers anyhwere you want them. The super strong suction cup will easily stick to hard surfaces, and it will maintain a strong bond until you decide to take it down. It is ideal for decoration, but can also be used for rooting when starting new plants from clippings. Unlike similar items, this one is made from thick and sturdy glass, so it won’t flop around or look cheap like those plastic versions do. Thanks to the above average suction cup on this vase, it works well on almost any hard surface, and will not sag or slip with weight. It can also be ideal for family or friends with extended hospital stays, or those in hospice care. Anyone who likes flowers will love the floral illusion because it allows you to put flowers where it was never before possible.

Completed Faux Stone Tile Backsplash! | Duration 1 Minutes 26 Seconds The suction cup on this vase will stick to virtually any flat, clean surface. To stick to any surface, just wet the suction cup slightly and then apply with direct pressure. Use dried flowers or fresh and the results will be the same. This unique decoration and conversation piece will enhance any decor. This beautiful little gift makes people really happy! Seem to stick well to the window, although a bit of moisture helped here to get a good connection. She says it goes on the backsplash behind her sink and she has a lovely flower greeting her each time she washes dishes. A good value and we will definitely come back for other items. They dress up my roses in the bathroom mirrors, in the windows, shower door, etc. I originally received the above as a favor at a garden club meeting. I have used it over my sink window ever since for my short stemmed roses. They were also very dusty inside and seemed fragile to try to clean inside because of size. Despite being a fussy former architect and interior decorator, she was extremely delighted to receive them! The vases, complete with ribbons and flowers kept the office looking very festive and were appreciated by virtually everyone. A simply beautiful inexpensive gift that will be appreciated everyday!

Neutral Paint Colors by rughdesign.com

I love that they are not too gray, while not being too golden/beige either. I have seen these beauties on walls over and over and they never disappoint! Lattice is a perfect combination of gray with a hint of blue and it doesn’t feel too cold. I have used these in the past for many model homes and recommend them now to my clients. I would love to set up an appointment with you soon! My advice is to match your cabinet color and your trim (all doors, window sills, baseboards, etc.).

Awesome Homdox 3d Vinyl Wallpapers Stack Stone Brick For Craft Projects As Well As Walls | Duration 3 Minutes 8 Seconds I think it depends if you prefer a warmer or more taupe look. With cherry cabinets and black granite countertops, there are a lot of options for neutrals. We really wanted to paint the ceilings this time around. We were looking at doing a medium beige wall with a blue ceiling to contrast the light floor and cabinets. Any other suggestions other than beige and blue would be helpful. I have it in my home as my all-over color and it doesn’t get too “cold” looking. I would like to get rid of some of our accent colors in other rooms…ie. We are currently waiting on our new construction and paint is needed like yesterday! Also, do you have any other colors in your home that you are trying to accuentuate? We need a paint color for all the living areas since all the walls run together. I thought about painting the ceilings just in the living room sea salt since the one color we pick to go throughout the whole house needs to be a neutral. Sounds like it would also look good with the white and the stained wood trim. If you have white trim and cabinets, it would be nice to pop them out with a tiny bit more color. I personally love a strong contrast and am usually drawn to a bright true white vs a creamy white. They are the perfect in-between; not too golden, not too gray/taupe. You can take pictures of anything and it automatically matches paint colors and sets up a scheme for you. It looks crisp against the paint, but it’s also creamier than a white white, which sounds like what you want.

How To Install A Tile Backsplash! | Michelle Pearson | Duration 11 Minutes 38 Seconds You don’t have to be super matchy-matchy with something like that, especially with appliances. We have cherry wood cabinets and black granite in our kitchen. Get some paint samples and try them out in your space before you commit. We will have a gray/beige/black mixture granite counter top, white trim around the doors and ceiling, white cabinets, and a light beige and white tile. We thought a gray would look good to match the counter top but we didnt want it too boring or depressing. I like the idea of a nice warm color for ceilings and walls with crisp white trim and crown moulding. I really want to put in place a more neutral color palette that includes grays. We have an open concept with vaulted ceilings and 12ft dining and foyer. There will be white wainscoting but we are leaving all the stained wood trim. What color would you pick to compliment the sea salt ceilings, stained wood trim, white wainscoting/fireplace and golden wood floors? Do you think balanced will be too dark, or accessible too light? It also depends on what kind of whites you are drawn to or currently have in your home.

2019 Kitchen Flooring Trends: 20+ Flooring Ideas For The Perfect Kitchen by flooringinc.com

Use this guide to the hottest 2019 kitchen flooring trends and find durable, stylish kitchen flooring ideas that will stay trendy for years to come. Because, is there anything more exciting than remodeling your kitchen? With modern technology, just about any floor can mimic a realistic wood look without that pesky wood maintenance. In 2019, you’ll see lots of trendy kitchens that are practical as well. These can be 100% waterproof and will hold up under a lot of conditions. If you are picking wood looking tiles, real wood, laminate, or vinyl your best best is 6-8” wide and 24’-48” long. I also mentioned that you don’t want a high-maintenance kitchen floor.

How To Paint A Tile Backsplash | Duration 5 Minutes 55 Seconds Tile is known for being durable and easy to clean, perfect for kitchens. The wood-look tile kitchen flooring trend is super hot right now . In fact, before laminate really took off, you didn’t see many kitchens with wood (or wood-look) floors. Throwing an inexpensive wood-look option into the mix really changed things. That is, unless you go with waterproof laminate flooring. A step up in durability and perception from laminate, engineered wood is the only option (aside from solid hardwood, obviously) that is made from real wood. If you want real wood in your kitchen, engineered wood is the way to go . It is the only option other than solid hardwood that looks exactly like the real deal. That’s why more and more homeowners are using bamboo kitchen flooring. Environmentally responsible floors are in all around and bamboo is no exception. Yes, you may have a lot of banging around going in the kitchen, but you know what else you have? It’s resilient and known for being the most comfortable and joint-friendly flooring option. That means we need more flooring colors to match everything, from fun, aqua cabinets to butcher board counters and everything in between. As more homeowners embrace the light, airy feel in their home, you will see a huge resurgence in blonde wood (and wood-look) floors. With blonde wood, your decorating possibilities are endless. Homeowners are now steering away from sharper, modern, industrial looks and trending towards an updated farmhouse style. Contrary to ultra-dark espresso looks, blonde floors make your kitchen feel larger and more open, especially if you use large planks. However, honey wood is not just a trend; it’s a color classic. I think this warm, cozy tone is definitely going to be around for the long haul. It fits right in with the 2019 aged and worn trends happening across all styles of flooring. Will the whitewashed kitchen flooring trend last in 2020 and beyond? Dark, rich colors look gorgeous and elegant, giving your room an expensive feel. Dark floors offer a sleeker look that sets the perfect tone for sharp contemporary lines and minimalist decor. Well, that’s because dark colors naturally make things appear smaller. Let me tell you, as someone who uses the heck out of my kitchen, your kitchen floor must be extremely durable. There are so many options these days, you don’t have to choose between just hardwood and tile. The new vinyl plank floors off the visual beauty of a hardwood floor with unparalleled durability. Elongated tiles or planks have made a splash and are here to stay. But, with the surge in wood kitchen flooring, is tile on its way out? You see, something technology has given us, other than that weird thumb thing that happens when you’ve sent too many long text messages, is the ability to achieve virtually any look with any type of flooring. You will see even more convincing wood looks and all of the current wood trends including handscraped wood looks, distressed wood looks and even high color variation. This relatively new flooring option will likely be trending in the kitchen and all around the house over the next decade. Engineered wood features a thin veneer top layer of solid wood; however, the remaining base of the product is made up of plywood or high-density fiberboard. Engineered wood is extremely durable and offers looks in just about every trending wood look. I think of it as the busy homeowner’s wood flooring. I believe engineered wood flooring will quickly become a kitchen staple. Bamboo is the most durable flooring option on the market. Bamboo is highly renewable , making it one of the more eco-friendly flooring options. Bamboo may be the most durable flooring, but it is also the most temperature and moisture sensitive. You want, like, a totally chill, low-maintenance kitchen floor. Additionally, cork flooring is eco-friendly– another hot flooring idea for 2019! It does, however, have its own unique look that no other flooring has been able to replicate. Just like solid hardwood, cork is very susceptible to dents and scratches. I don’t think the cork in the kitchen trend will be around too much longer . Kitchen cabinet and decor trends are going brighter and bolder. Here are the best floor colors keep your kitchen trendy in 2019. Blonde floors, in particular, can give you that light timeless feel. You can go for a chic, contemporary feel or a rustic, homey vibe. The open, light, airy look is especially popular in modern kitchens. If you ask me, the blonde wood look will become a trend-turned-classic before you can even think about switching it up to something new. Honey floors are still light enough to give you many of the benefits of blonde looks, making your kitchen look larger and more open. To be frank, the trends often drift back and forth between warm and cool tones. Will the honey kitchen flooring trend last in 2020 and beyond? I believe that honey wood looks will remain classic and relevant for decades to come. Whitewash will make your home look brighter, bigger and more relaxed . Over on the east coast, homeowners are still turning their nose up at the whole west coast look and feel. The downside to dark floors is they can make your room look smaller.

Ask Maria: How To Coordinate Finishes With Oak Cabinets by mariakillam.com

However honey oak is still being installed all around the country as we speak. So, if you have them, and are not prepared to paint them white, what should you do? My first choice would be an off-white or cream countertop and coordinating subway tiled backsplash. The floors and and the walls are bright white and not a stitch of white is repeated in the backsplash tile but it relates so well to the countrified oak cabinets and black countertops it works. Notice the great layout, pretty windows, also the abundant light which is what makes the white in this room look wonderful instead of dingy. I always resist installing finishes that are so bossy, you end up stuck to only two colour options (for example) until the day it comes out. If you want to update the look, you could consider a hand scraped look and go lighter or darker than your existing honey oak cabinets. That will simply look like yesterday and today all in the same room. If you want a multi-coloured backsplash, make sure it picks up on your countertops and flooring. Then the only colours you need to avoid is pinks and pink beige’s. Not oak, but the look is not far from what you could create if you were looking for a more classic feel even if it’s not a trendy look right now. It is a small house the first flor is 450 sq feet with good loght sun in kitchen in the am and in the living room in the pm. We have decided to paint the wall aloof grey but was unable to decide what color to choose on the backsplash. This way, your options for wall colour still remain relatively open. The average tract home with newly installed oak cabinets probably doesn’t look like this. If you have solid coloured countertops in cream or grey then your backsplash should be the same colour. It was the 90s when gray was trendy but the grey created a nice balance of warm and cool combined with the yellow cabinets and floors. To make sure the undertones in your home are right, get some large samples! Also have a ventless dark honey oak gas fireplace in the living room. That should dictate the paint colour in your kitchen! My floor is new and it is long length tile that looks like wood. With my curated collection of the most useful neutrals you will find the perfect paint colour every time.

Plasterwork by en.wikipe dia.org

For the art history of three-dimensional plaster, see stucco. The 17th century saw the introduction of different types of internal plasterwork. Stucco lustro was another a form of imitation marble (sometimes called stucco lucido) where a thin layer of lime or gypsum plaster was applied over a scored support of lime, with pigments scattered on surface of the wet plaster. It could also be cast to form mouldings and other ornaments. Natural cements were frequently used in stucco mixes during the 1820s. The development of artificial cements had started early in the 19th century. With this increased strength, it ceased to be just a veneer and became a more integral part of the building structure. The 19th century also saw the revival of the use of oil mastics. Moulded or cast masonry substitutes, such as cast stone and poured concrete, became popular in place of quarried stone during the 19th century. By the mid 19th century manufacturing centres were preparing cast stones based on cement for use in buildings. Rent laths give the best results, as they split in a line with the grain of the wood, and are stronger and not so liable to twist as machine-made laths, some of the fibers of which are usually cut in the process of sawing. By breaking the joints of the lathing in this way, the tendency for the plaster to crack along the line of joints is diminished and a better key is obtained. All timbers over three inches (76 mm) wide should be counter-lathed, that is, have a fillet or double lath nailed along the centre upon which the laths are then nailed. Walls liable to damp are sometimes battened and lathed to form an air cavity between the damp wall and the plastering. Lathing nails are usually of iron, cut, wrought or cast, and in the better class of work they are galvanized to prevent rusting. Hydraulic limes are also used by the plasterer, but chiefly for external work. Lime should therefore be run as soon as the building is begun, and at least three weeks should elapse between the operation of running the lime and its use. Before use it must be well beaten, or teased, to separate the lumps. After remaining in a dry cellar for nine months the barrels were opened. It is useful sometimes for heavy cornices and similar work, as it renders the material light and strong. The sawdust is used to bind the mix sometimes to make it go further. The finishing or setting coat is about 3/16 inches thick, and is worked with a hand float on the surface of the rendering, which must first be well wetted. At the present time it has fallen into disfavor, but in the early part of the 19th century a great deal of this work was done. The principal varieties of stucco are common, rough, trowelled and bastard. The wall should be sufficiently rough to form a key and well wetted to prevent the moisture being absorbed from the plaster. Lines are ruled before the stuff is set to represent the joints of stonework. A very fine smooth surface is produced by means of the hand float. It is laid on in two coats with a skimming float, scoured off at once, and then trowelled. The second coat is also composed of coarse stuff knocked up to a smooth and uniform consistency. The shingle is often dipped in hot lime paste, well stirred up, and used as required. Sometimes the coats are in three different colors, such as brown for the first, red for the second, and white or grey for the final coat. Combinations of these colors are made to produce any desired tone. One coat work is the coarsest and cheapest class of plastering, and is limited to inferior buildings, such as outhouses, where merely a rough coating is required to keep out the weather and draughts. Two-coat work is often used for factories or warehouses and the less important rooms of residences. A thin coat of setting stuff is then laid on, and trowelled and brushed smooth. This makes a strong, straight, sanitary coating for walls and ceilings. The surface while still soft is scratched with a lath to give a key for the next coat. The second or “floating coat”, and is 1/4 to 3/8 inches thick. The filling in, or flanking, consists of laying the spaces between the screeds with coarse stuff, which is brought flush with the level of the screeds with the floating rule. It is done by the plasterer with a hand float that he applies vigorously with a rapid circular motion, at the same time sprinkling the work with water from a stock brush in the other hand. The whole surface should be uniformly scoured two or three times, with an interval between each operation of from six to twenty-four hours. The third and final coat is the setting coat, which should be about 1/8 inch thick. Floating stuff is of finer texture than that used for pricking up, and is used in a softer state, enabling it to be worked well into the keying of the first coat. For use in setting it is mixed with fine washed sand in the ratio of one to three. The plaster they contain causes them to set quickly with a very hard smooth surface, which may be painted or papered within a few hours of its being finished. In two coat render a base coat is applied with a common mix of 4 parts sand to one part cement and one part dehydrated lime and water to make a consistent mortar. For two coat, some plasterers apply two full depth bands of render (one at the base of the wall and one around chest height) which are screed plumb and square and allowed to dry while applying the first coat over the remaining exposed wall. This method allows the rest of the wall to be rendered and screed off without the need to continually check if the second coat is plumb. The first method is generally used where quality of finish is at a premium. The second coat can be a slightly weaker mix 5/1/1, or the same as the base coat with maybe a water proofer in the mix added to the water to minimize efflorescence (rising of salts). This is a form of incised, moulded or modelled ornament, executed in lime putty or mixtures of lime and gypsum plaster. This was composed of gypsum plaster, animal glue and pigments, used to imitate coloured marbles and pietre dure ornament. Stucco marble was an artificial marble made using gypsum (sometimes with lime), pigments, water and glue. The 18th century gave rise to renewed interest in innovative external plasters. This was a lime-based mix and included “oyls of tar, turpentine and linseed” besides many other ingredients. It was however of an unattractive brown colour, which needed to be disguised by surface finishes. No longer used just as a coating for a substantial material like masonry or log, stucco could now be applied over wood or metal lath attached to a light wood frame. Early 19th century rendered façades were colour-washed with distemper; oil paint for external walls was introduced around 1840. However, this was not the first time “artificial stone” had been widely used. These were made primarily with a cement mix often incorporating fine and coarse aggregates for texture, pigments or dyes to imitate colouring and veining of natural stones, as well as other additives. While most tools have remained unchanged over the centuries, developments in modern materials have led to some changes. Wooden laths are narrow strips of straight-grained wood depending on availability of species in lengths of from two to four or five feet to suit the distances at which the timbers of a floor or partition are set. Most are now made by machinery and are known as sawn laths, those made by hand being called rent or riven laths. Laths must be nailed so as to break joint in bays three or four feet wide with ends butted one against the other. Every lath should be nailed at each end and wherever it crosses a joist or stud. Perfect slaking of the calcined lime before being used is very important as, if used in a partially slaked condition, it will “blow” when in position and blister the work. Hair functions in much the same way as the strands in fiberglass resin, by controlling and containing any small cracks within the mortar while it dries or when it is subject to flexing. Sawdust has been used as a substitute for hair and also instead of sand as an aggregate. Common stucco for external work is usually composed of one part hydraulic lime and three parts sand. Trowelled stucco, the finishing coat of this work, consists of three parts sand to two parts fine stuff. Bastard stucco is of similar composition, but less labor is expended on it. Colored stucco: lime stucco may be executed in colors, the desired tints being obtained by mixing with the lime various oxides. When well executed with good material this kind of plastering is very durable. This layer is well scratched to give a key for the next coat. Two finish two techniques can be used: dry dash: while the first coat is still soft, gravel, shingle or other small stones are evenly thrown on with a small scoop and then brushed over with thin lime mortar to give a uniform surface. Properly treated, the work is durable, effective and inexpensive. This is described as render on brickwork, and lath and lay or lath and plaster one coat on studding. The first coat is of coarse stuff finished fair with the darby float and scoured. When on laths the stuff should be plastic enough to be worked through the spaces between the laths to form a key, yet so firm as not to drop off. Four operations are involved in laying the second coat, namely, forming the screeds; filling in the spaces between the screeds; scouring the surface; keying the face for finishing. Any small holes or inequalities are filled up as he proceeds. It should be mixed with clean water to such a consistency that a quantity picked up on the point of a trowel holds well together and does not drop. Fine stuff, or lime putty, is pure lime that has been slaked and then mixed with water to a semi-fluid consistency, and allowed to stand until it has developed into a soft paste. For cornices and for setting when the second coat is not allowed time to dry properly, a special compound must be used. The plaster in the material causes it to set rapidly, but if it is present in too large a proportion the work will crack in setting. Render is applied using a hawk and trowel and pushed on about 12 mm thick to begin. The render is then scratched to provide a key for the second coat. Alternatively, both coats can be applied with the plasterer using a t-bar to screed the final coat until it is plumb straight and square. The second method is quicker but can be several millimeters out of plumb. The mortar is applied to about 5 mm thick and when the render hardens is screeded off straight.

Back Splash Tile Materials by stonetileus.com

Make a list, purchase needed tools and materials have everything assembled before getting started. You can make straight cut with the tile saw only, not nippers. Lay tiles before using adhesive and then tiles can be cut with a knife on grout lines. Next mix thinset to a thick creamy consistency, allow it sit for 10 minutes. It is suggested to rent a wet saw, if you don’t know someone that will share theirs with you. Saw has a range of prices but will be a couple hundred dollars). Mosaics are made by hand on a 12×12 mesh for easy installation. You should take measurements measure to center of the room. Start at each corner and mark chalk lines to make a box for the field tile. To get wall tiles to size cut with a wet saw, you can use a tile nipper for small tight areas.

Kitchen Backsplash Tiles 2018 Designs Ideas and Pictures by diyhomedesignideas.com

The key to great cheap backsplash ideas is a little imagination. A kitchen backsplash serves two purposes – first to provide eye-catching visual interest and second to protect walls from food splashes while cooking. Even better, tiling a backsplash is a quick and easy do it yourself project that can be achieved on nearly any budget. These are great additions to small kitchen ideas because very limited amounts of tile are needed. Even better, decorating with a new backsplash is quite budget friendly as well. The best backsplash for a new kitchen is one that provides an accent to the overall décor scheme while remaining highly durable and able to withstand frequent cleaning and abuse.

Bevelled Brick White Gloss Wall Tiles Retro Metro Tiles 200x100x5mm Tiles by wallsandfloors.co.uk

Modelled on the underground or subway tiles, these flexible wall tiles can be used in a variety of techniques from horizontal or vertical brick-bond to herringbone. Use our calculator and apply online or give us a call on 01536 314730 then choose your flexible 0% interest free option. These tiles have normal exposed edges and the usual way we would advise finishing them is with a tile trim. This can then be painted the same colour to blend with the remainder of the wall. Thank you for pointing this out to us and we apologise for any inconvenience this may have caused. However we can split packs to give you an exact amount depending on the size of your project. Providing the walls are correctly prepared and the tiles are fixed correctly with a solid bed of adhesive, they will be fine in any area from kitchens to bathrooms and showers. The colour can either blend or contrast the tile colour, or complement a particular rooms colour scheme. The fantastic metro bevelled edge adds a unique finish to your wall surface. The heavier bevel on these white metro tiles means they will work great on their own to create a clean and crisp white finish. As well as our 60-day refunds and returns, we are proud to offer a 365-day exchange period. Unfortunately we do not accept exchanges on adhesives and grouts, only tiles. We try our best to ensure we keep our tile prices low, however if you find the same tiles cheaper elsewhere online we will beat the price by 5%. Find out more about our sales and customer service teams here. With our flexible finance packages, you pay at a rate that’s convenient to you. However a 10mm trim can be used, but it will take a little extra adhesive under the tiles to allow enough room for adjustment for the trim to sit level. However, another method its to spread a thin bead of decorators caulk across the top to cloak the edge. We will review the video so that we can make it a little clearer. What do you recommend we do for the edge of the wall? The tiles can be cut very easily with a tile cutter and this is how angles, corners and edges are formed. The thickness of a tile will not have any affect on how it performs it’s duties.

5 Inspired Solid Slab Granite Marble Or Quartz Backsplash Ideas by msisurfaces.com

First, ease of care – no worries about splashes or splatters from messy cooking mishaps; you can clean it just the same as your countertop. The gold and taupe flecks and veins warm up the white background, adding dimension. Continuing that slab to the vertical space, even just a few inches or in one section of wall (such as behind the cooktop) instantly upgrades the room to a truly special space. There are many advantages to choosing slab stone instead of traditional options like subway tile or mosaic tile. Of course you know it’ll match your counters perfectly, and the natural veining and swirling patterns can create a truly dramatic vertical surface. Even a small backsplash installation, coordinated with a matching countertop, adds an opulent touch.

How To Find The Right White by makingyourhomebeautiful.com

Pink based whites are very soft and can work well with the addition of some grey. Don’t forget if you are confused about strengths of your chosen colour to go back to my fail safe formula – then you can’t go wrong. We went with quarter strength white cloak and vivid white (satin poly for joinery and satin enamel for trim) and we are super happy with the results. Remember too that if your apartment seems darker you could get some white or neutral rugs to give it a lift. The majority of rooms face east (morning sun) so it’s not an overly sun filled /light space. I have had clients who have used this throughout their house, including kitchen cabinetry, and they have been very happy with it. Either use this for your trim too and quarter strength for the ceiling as the problems come when you put different whites together. The kitchen cabinets and aluminium window frames are cream too. The problem will be however how it reads with your kitchen cabinets. Try it with a small sample against your cabinets – it will work with the timber and carpet – it’s just the cabinets that may throw it all. I just hope the ceilings dont need to be changed cause l dont think l could manage it. Anything darker in the blue range really does start to read blue but if you go with a white that has a touch of grey it will give you a lovely elegant feel. It really does depend on so many other factors so you will need to paint a sample board and see how it reads in the light of the room. What whites and perhaps light grays would you use for a coastal feel? I think you need to be careful about using whites that are too cool as they sometimes read too blue and also can be quite cold. All whites, greys and other neutrals have a different base so if you find one that you like it can work well to use varying strengths and that way you do not put a white that has a blue base with another darker one that may have a green base. I was originally going to go with natural white on walls but it looked a little creamy against the grey. It really depends how grey you want to go on the walls as this will also change the overall mood and feel of the house. Get together the fabrics that you love, furniture and accessories you already own and plan to keep, artworks and any other inspiration you have. Leaning towards snowy mountains quarter but are worried it will be too light in the adjoining living area. Is there a natural break between the kitchen and living where you could switch strengths? Kitchen cabinetry can also be treated the same way as internal trim and doors. I am so disappointed as it picks up far too much yellow and looks cream. Always try a sample on a large piece of card and try not to look at it against your current wall colour as it is better to see it in isolation with your flooring. If you want a more contemporary look then you should go for a white that has some grey in it but consider how much light the room receives. And do paint a sample board before you commit as colours vary so much in different locations so these musings are really just a guide! Aiming to have a feeling of space and freshness to counteract an older style floor board, as the space is much darker now since we replaced the white tiles. If they are a white you need to use a white that will tie in with these cupboards or the whole scheme could be thrown. Are you able to advise a good white with green and with grey undertones. The room is very bright and is furnished with greys and linens. The main floor is white and gray veined marble, the floor trim along the wall is matching marble. I am unable to paint swatches and put up against the wall to test lighting effects. You could also use this to get a sample of the colour from a store local to you which may help you to see if you like it or not. I understand warm whites look best in rooms that aren’t flooded with natural white. Why don’t you paint a large board with two coats and put it in your house and look at it throughout the day? The current scheme is cream with a light chocolate carpet and reddish toned timber floor boards. Spotted gum flooring in living areas but will have a grey carpet in bedrooms(this hasn’t been picked yet). I didnt realise it was a cool white and am grateful its not blueish. I think the key is to steer clear of any of the warm whites and then it really depends on how white you want the walls to be. I would also recommend that you buy sample pots and paint large boards before you commit to any colour to ensure that you like it. I hope this is helpful and that you are happy in your new home. I hope this helps and that you enjoy your lovely new beach house. However to help you decide for yourself you really need to consider all the other elements for your decorating plan. Put it all together and then make a decision to go in one direction. I often work with people who have a very good idea about what they want but just need a coach almost to keep them on track! We have natural white currently and its too creamy & not white and bright enough & we think lexicon half looks too blue. We want something modern and bright that wont throw too much colour against the kitchen. Also then worried that the half strength might throw colour against the kitchen.

16 Oz. Scum Off Shower Cleaner by simplygoodstuff.com

As soon as you put it on, it will immediately begin breaking down residues, loosening crusty deposits, and floating it all off the surface so it is easy for you to wipe off. It is a powerful, non-toxic solvent that makes cleaning your tub or shower easier than ever as you limit your exposure to the stinky sprays, or chemical filled gels. That’s all there is to having a spotless, residue-free shower or bathtub. This is because you will be removing the layers of dirt and residue left behind by other cleaners. It contains no toxic chemicals and can be used with complete confidence around children, pets and food. It is completely safe for skin contact, with absolutely no adverse impact. Unlike traditional cleaners, it will never leave a sticky residue or harm any surface you use it on. It lubricates the surface, and the added heat helps to activate the cleaner. Get a good layer on all areas and then proceed to the next step. Exact time will depend upon how bad the grime is, but you want to wait at least twenty minutes for best results. It begins breaking down all of the build-up, making it easy to wipe clean. Rinse thoroughly with water and then sit back and admire your sparkling surface. Save money and make the chore of cleaning your bathroom easier than ever. Although it is ideal for tub and tile cleaning, this remarkable product is actually far more versatile than other single use cleaners on the market. Use it to clean your shower, but then take it out of the bathroom to tackle other tough jobs too. Shake well to combine then use everyday after you finish showering. If you have major grease to remove, coat with full strength, turn on the heat to activate, then let it cool all the way and wipe clean. For stubborn grime let it sit for 30 minutes, but do not let it sit out in the sun. For hard water spots use a sponge to apply full strength, let it sit for 20 mins and then wipe and rise off. Safe for the environment, safe for your tub, and highly concentrated to make cleaning easy. You have to apply it multiple times to get the wanted result, but it took almost all the scum (23 years of it) of our shower doors. Very easy to use and for the first time my shower doors look clean. Took me a couple days for three years of layers to come off. Be prepare to repeat the process 4-6 times and use some elbow grease along with a (drill) brush. Very disappointing to see no difference in my fiberglass tub that has minor staining. It came out of the bottle gloppy and wouldn’t mix with water to put in a spray bottle. Rigorous scrubbing and the use of toxic chemicals are no longer necessary when you choose this safe and effective alternative. Regular soap scum, water spots, hard water stains, calcium deposits and other build up will slide right off surfaces once this powerful product has had time to work. Traditional shower cleaners will usually leave behind a sticky film that attracts more dirt, and that same layer will make the dirt and grime cling to tile, glass and fiberglass so it is more difficult to clean. Your first application will be easier, and more effective than using the stuff you have now, but each application after that will take even less time and effort. But because it doesn’t contain any harsh chemicals, it is completely safe to use on any shower surface, and it will never harm anything you use it on. Even delicate stones and tiles like travertine and slate are not at risk of being damaged by this amazing cleaner. You can even use it without gloves on, unlike virtually any other shower cleaner out there. If you are currently spraying and scrubbing to get bathroom surfaces clean, try this for an easier way to achieve better results. It works on tile and fiberglass, but you can also use it on marble, glass doors, chrome fixtures and anything else. After you have waited for the cleaner to work, just come back with a wet scrub sponge and a small amount of cleaner to wipe it clean. Make your own daily shower cleaner for just twenty cents a quart. Use the gel to clean it initially, and then just spray the daily cleaner everyday to keep your shower looking spotless for months. It has been tested by an independent lab, which concluded that the product is 100% biodegradable and non-toxic. Not only will it be safer and more effective on your bathtub, but it is actually useful for other things unlike the traditional cleaner you are annoyed with now. Coat all surfaces to make water sheet off instead of drying to form spots. For lighter work, spray on a mixture of 1 tbs per quart of water. For general cleaning, use 1 tsp per quart of water in a spray bottle. If you get streaks, then you need less cleaner and more water. Wet the entire area to be cleaned, then apply with a sponge or brush and then wipe or hose off. This is meant as an additive, so use regular detergent at the same time. It not only rinses away the shower scum from your glass shower doors, it does so without harsh chemicals. I purchased two containers of it and eagerly used it on my fiberglass insert shower (which was old and faded), and the glass doors. It does a really nice job of taking scum off of shower doors as well as surrounding area.

Kitchen Color Schemes by kitchen-design-ideas.org

For these reasons, it’s best to start out by choosing a cabinet color that fits your personality and your home’s style before deciding the other colors in your kitchen. As focal points, your sink and appliances can have a big impact on your kitchen color scheme. Be sure to bring a sample of your cabinetry color to help you choose a coordinating countertop color. For example, a traditional kitchen can be made quite modern simply by adjusting the colors in the kitchen. Stainless steel is an excellent choice, and white looks right in certain situations. Because kitchen walls are mostly covered by cabinets and backsplashes, wall colors are often decided last. While the walls are often obscured by cabinets, pick a color that balances well with the floors, cabinets, and backsplash. While it is common to coordinate the faucets and handles colors, it is not required. Do you crave a bright, welcoming kitchen or a luxurious gourmet theme? Consider your style before finalizing the kitchen color scheme. The natural grain and tone of wood strongly affects your kitchen color scheme. With over 1500 colors to choose from, it’s easy to find some great options.

Sources:

Leave a Reply

Your email address will not be published. Required fields are marked *